- Wait 7 days after painting before use
- DO NOT apply strips to paper or soft surfaces on frame
- Remove hanging hardware from back of frame
- DO NOT hang over beds or on wallpaper
- DO NOT hang valuable or irreplaceable items
- Hooks have a temperature range of 50°F to 105°F
Failure to follow instructions carefully may cause damage.
Step 1: Wipe wall with rubbing alcohol. Do not use household cleaners or water.
Step 2: Remove the red liner from your adhesive strip and press firmly to the hanger.
Step 3: Remove the black liner and press the back of the strip firmly against the wall for 30 seconds. If using a Universal Hanger, position the post at the bottom for wire-backed frames, and at the top for all other types. Wait 1 hour before use. If NOT using a Jumbo Universal Hanger, skip to step 6.
Step 4 (For Jumbo Universal Hanger Only): Once the hanger is mounted, separate stabilizer strips and click them together.
Step 5 (For Jumbo Universal Hanger Only): Remove liners from one side of each pair and press firmly to the frame near the bottom
Step 6: Remove the remaining liners and hang your picture on the hanger. Firmly press the frame to the wall for 30 seconds. Wait 1 hour before use.
Step 1: Hold hook gently in place with one hand.
Step 2: NEVER pull the strip towards you. Always pull straight down.
Step 3: With the other hand, stretch the strip slowly against the wall (at least 12 inches) to release.
Explore how to use Command™ Strips and more damage-free hanging solutions.