How to use Command™ Curtain Rod Hooks

Jump to:

Watch How to Use Command™ Curtain Rod Hooks

Video on how to use Command™ Curtain Rod Hooks, and how to remove Command™ Products when the strip breaks.

- Wait 7 days after painting before use

- DO NOT use on wallpaper, fabric, textured walls, brick, or rough surfaces

- DO NOT hang over beds

- DO NOT hang frames on hooks

- Keep children away from curtains

- Use indoors at temperatures between 50° to 105°F (10° to 40°C)

- Mark the walls lightly with pencil where the rods will be placed

- Measure the same distance above the window frame on each side to level

- Hang 4 ¬to 12 inches past the frame and 2 to 6 inches above the window

- Compatible with rods up to 3/4 inches in diameter

Failure to follow instructions carefully may cause damage.

Step 1: Clean surface with rubbing alcohol. Do not use household cleaners or water.
Step 2: Separate strips. Remove red liners. Press two strips onto the mounting base.
Step 3: Remove black liner(s). Press hook onto wall and hold for 10 seconds.
Step 4: Temporarily remove hook from wall to reinforce strips. Slide hook up and off base.
Step 5: Press base to the wall firmly for 30 seconds.
Step: Slide hook back on. Wait 1 hour for adhesive to build.

Learn the proper way to remove Command™ Hooks.

Step 1: Slide hook up and off mounting base.
Step 2: With one hand, gently hold mounting base in place.
Step 3: With the other hand, gently stretch the strip tab straight down along the wall at least 15 inches to release. Never pull the strip toward you. Always go slow and pull straight down.